Caveman BC1 - Page 2

BOOSTLEVEL
BOOSTLEVEL
QUICK GUIDE
BC1 BASS COMPRESSOR
THRESHOLD:
Sets the point where the compression starts to kick in. Adjustable from -20dB to +20dB.
ATTACK:
Determines how fast the compression kicks in. Adjustable from 0.1ms to 25ms.
RELEASE:
Determines how long the compressor should “hold the signal”. Adjustable from 100 ms to 1.2 sec.
LEVEL:
Sets the overall output of the BC1.
BOOST:
Sets the overall output of the BC1 when Boost is on.
If you boost the signal before the BC1, the input will of course increase, which will make the BC1 compress more.
If you reduce the signal before the BC1, the unit will compress less.
That is why we have added a second overall output level control, to provide you with the option of having two different output levels,
with the same amount of compression – and then it is up to you if you want boost or lower the signal.
We recommend the following settings as a starting point - when the BC1 is used post preamp in serial mode.
LEVEL and BOOST is set as required.
Gain and Level on BP1C/BP1 is both set to 12 o'clock.
We hope you will enjoy your new Caveman Audio product and that your new sound will be a great inspiration to you.