48
olun.
geçirilmelidir (k).
gerebilmesi önemlidir.
PLACING THE SEAT IN THE VEHICLE
Place CBX Solution on the chosen seat in the car.
Note!
a blanket to protect your seats.
Please make sure that the back rest (a) of the child seat lies flat against the
back rest of the vehicle seat so that the child seat is under no circumstances
in a sleeping position.
Note! If the headrest of the vehicle seat interferes, please pull it out to the
farthest position and turn it around or take it off entirely. The car seat‘s back
rest (a) optimally adjusts to almost any inclination of the vehicle seat.
leave the CBX Solution in a normal upright position.
BUCKLING UP THE CHILD
Place your child in the CBX Solution. Pull out the 3-Point safety belt around
fastened correctly.
Insert the lap belt (n) into the belt guides of the seat (k).
Tighten the lap belt (n) by pulling the diagonal belt (f). The tighter the belt
the safer it is for the child.
of the seat (d) on the side of the buckle (l).
reach into the bottom belt guide (k). If the belt strap is too long then the
seat is not suitable for this vehicle.
The lap belt (n) should be in the belt openings (k) of the seat cushion (d)
on both sides.
Note!
tight belt and to tighten the belt by itself if necessary.
your child as possible in order to take optimal effect in case of an accident.
headrest (e) until it is secured.