ccei Mini Brio 2 X3 color

To Next Page

Technical instructions

Mini Brio 2 X3 color

Underwater LED light

P/N: PK11R010

Table of Contents

1. Packaging contents ...................................................................................................................... 2

2. Warnings ..................................................................................................................................... 2

3. Technical features ........................................................................................................................ 3

4. Installation ................................................................................................................................... 3

4.1. Electrical connection ......................................................................................................... 3

4.2. Installation in a standard 2'' feedthrough with PF10R294 .................................................. 5

4.3. Installation in CCEI return fitting ..................................................................................... 5

5. Fountain stand for Mini Brio 2 X3 (Optional) ............................................................................. 6

6. Additional installation recommendations ..................................................................................... 7

A. Technical support ..................................................................................................................... 8

B. Declaration of conformity ......................................................................................................... 8

Read these instructions carefully before installing, commissioning and using this

product.

Lights must never be turned on outside of water.

For supply connection, use only an isolating low voltage power supply with un-

grounded output, evaluated for swimming pool use.

v ()

Main Page

Need help?

Do you have a question about the ccei Mini Brio 2 X3 color and is the answer not in the manual?

Summary

Installation Guide

Electrical Connection

Details electrical connection requirements and safety precautions for installation.

Install in 2 Feedthrough

Instructions for installing the fixture using a 2" feedthrough adapter.

Install in CCEI Return Fitting

Steps for installing the fixture in CCEI concrete or liner return fittings.

Additional Installation Recommendations

The Mini Brio 2 X3 color is an underwater LED light designed for swimming pools, manufactured by CCEI Inc. It is a no-niche luminaire, meaning it does not require a dedicated niche for installation, simplifying the process. The product is listed under UL and cUL standards, indicating compliance with safety requirements for underwater luminaires in North America.

Function Description:

The Mini Brio 2 X3 color is an underwater LED light that provides illumination for swimming pools. It features 12 LED monochromatic power (3R/3G/3B/3W), allowing for various color options. The light is designed to be installed in standard 1.5" return fittings or CCEI return fittings, and can also be used with a fountain stand for multi-directional installations. It operates on a very low safety voltage (VLSV) of 24V DC, ensuring safety in a wet environment. The DMX program integration with the CCEI DMX3 controller allows for advanced control and customization of the lighting effects.

Important Technical Specifications:

Part Number: PK11R010
Dimensions: Ø 49mm (1-15/16") / depth: 63mm (2-1/2")
Installation:
- Horizontally or vertically in standard 1.5" return fittings for swimming pools (watertightness not guaranteed for this type of installation).
- CCEI return fittings available for concrete (PF10R291), fiberglass (PF10R291), or liner (PF10R292) configurations.
- In 2" return fitting (with PF10R294).
- Fountain stand CCEI (PK11RS10) for optional multi-directional installation.
Power Supply: Voltage: 24V DC / Frequency: 50Hz / 60Hz.
Power Consumed - Max. Luminous Flux: 19W - 700 lm (according to color).
LED Type: 12 LED monochromatic power (3R/3G/3B/3W).
Protection Index: IP-68.
Risk Group: Risk group 1 (low risk) according to IEC62471:2006.
Transformer Requirement: Requires a 24V DC transformer (45W or 90W) appropriate for the total number of lights connected.
Electrical Connection: Must be powered by VLSV (Very Low Safety Voltage) and connected to a circuit protected by a Ground Fault Circuit Interrupter (GFCI).

Usage Features:

Color Options: The 12 LED monochromatic power allows for a range of color choices (3 Red, 3 Green, 3 Blue, 3 White).
DMX Control: Compatible with the CCEI DMX3 controller for advanced programming and integration of lighting effects. This allows for dynamic and customizable light shows.
Versatile Installation: Can be installed in various pool types and return fittings, offering flexibility for different pool designs. The optional fountain stand (PK11RS10) enables multi-directional lighting for fountains or specific accent lighting.
Safety: Operates on a very low safety voltage (24V DC) and is designed to be connected to a GFCI-protected circuit, minimizing electrical hazards in a wet environment.
Underwater Operation: Specifically designed for continuous operation underwater. It is crucial that the lights are never turned on outside of water to prevent overheating and damage.

Maintenance Features:

Installation Tool: An (Un)Installation tool (P/N: MPBT0942) is included to assist with the installation and removal of the light fixture.
O-ring for Watertightness: When installed with CCEI return fittings, an O-ring is used between the light and the fitting to create a dry casing, enhancing watertightness and reducing the risk of freezing in the shaft. Grease should be used during O-ring installation.
Professional Installation Recommended: Due to the electrical hazards involved, installation by a licensed or certified electrician or a qualified pool professional is strongly recommended. This ensures compliance with national and local electrical codes (NEC, NFPA 70, CEC, CSA C22.1, IEC 364-7-702) and proper functioning of the device.
Power Disconnection for Servicing: Always disconnect power to the pool light at the circuit breaker before any servicing to prevent serious injury or death.
Cooling by Water: For concrete pools, the light should be installed after concrete spraying is finished to ensure it is cooled by water, which is essential for its proper functioning and warranty validity. Backfill work should be performed prior to installation to prevent overheating if the projector is covered.

Warnings and Important Notes:

This product must be installed by a licensed or certified electrician or a qualified pool professional in accordance with all applicable national and local electrical codes and ordinances.
Improper installation can lead to electrical hazards, resulting in serious injury, death, or property damage.
Always disconnect power before servicing the light.
Lights must never be turned on outside of water.
For supply connection, use only an isolating low voltage power supply with un-grounded output, evaluated for swimming pool use.
Except when the fixture is installed in an area of the swimming pool not used for swimming and adequately guarded, the top of the lens opening must be at least 457 mm (18") below the normal water level.
CCEI does not supply, create, program, or install the DMX software/program into the Mini Brio x3.