CCH YPL3 - User Manual

Questions and Answers

M
Matthew CortezJul 29, 2025
What to do if my CCH YPL3 Air Conditioner doesn't work?
- D
  Dr. Deborah MurphyJul 29, 2025
  If your CCH Air Conditioner isn't working, first ensure it's properly connected to a power supply outlet and switched on. If “FL” is flashing on the display screen, drain the water. Also, if the timer-off function is running, you will be able to turn on the unit three minutes later.
P
Phillip WeberAug 8, 2025
Why does my CCH Air Conditioner restart frequently?
- E
  Eric WalkerAug 8, 2025
  Your CCH Air Conditioner might restart frequently because it is in direct sunlight, so closing the curtains can help. Other potential causes include open windows or doors, too many people in the room, or a heat source nearby; try closing doors and windows and removing any heat sources. A dirty filter or a blocked air inlet or outlet can also cause this issue, so clean or replace the filters and remove any blockages.
M
Megan TaylorAug 18, 2025
What to do if the compressor of my CCH Air Conditioner doesn't work?
- W
  william98Aug 18, 2025
  If the compressor of your CCH Air Conditioner isn't working, it may be due to the compressor's self-protection feature. Wait for 3 minutes, and then restart it again after the temperature decreases.

Summary

Safety Information

General Safety Precautions

Essential safety rules for operating the appliance safely and correctly.

Installation Safety Recommendations

Guidelines for safe placement and setup of the air conditioner.

Installation Guide

Selecting Installation Location

Criteria for choosing a suitable and safe place for the unit.

Installation Procedure

Step-by-step guide for setting up the exhaust system and window kit.

Troubleshooting Guide

Common Problems and Solutions

Table of common issues, their causes, and recommended solutions.

Safety Cautions

Important immediate actions to take when abnormalities occur.

The CCH YPL3 is a portable air conditioner designed for domestic use, offering cooling, automatic adjusting, and fan modes. It is a self-evaporative system that recycles condensing water to cool the condenser, aiming to improve cooling efficiency and save energy.

Function Description:

The YPL3 portable air conditioner provides various operational modes to suit different needs. In Cooling mode, the unit defaults to cooling or can be manually selected. Users can set the room temperature between 62.6°F and 86°F and choose between high or low fan speeds. The Fan mode allows the unit to operate as a fan, with selectable high or low fan speeds, and the temperature remains constant. The Automatic mode adjusts its operation based on room temperature; if the room temperature is higher than 77°F, it switches to cool mode, and if cooler, it switches to fan mode. An optional Sleep mode activates a low fan speed for quieter operation, with the setting temperature increasing by 1 degree every 2 hours of running time, up to a maximum increase of 2 degrees. An optional Max cool mode runs the unit at high fan speed for maximum cooling, overriding temperature restrictions and fixing the fan speed. The Timer mode allows users to set an automatic turn-on time when the appliance is off (0-24 hours) or an automatic turn-off time when the appliance is running (0-24 hours).

Important Technical Specifications:

While specific power consumption and cooling capacity are not detailed, the manual emphasizes the unit's self-evaporative system for improved efficiency. The exhaust pipe has a maximum length of 59 inches, and it's crucial to use the shortest possible length and maintain a horizontal position for proper functioning. The unit requires a flat, dry installation surface with at least 20 inches of space around it for optimal airflow. The window slider kit is adjustable to fit various window widths.

Usage Features:

The YPL3 features a user-friendly Control Panel with buttons for Power, Mode (Cooling, Auto, Fan), Speed (High, Low fan speed), Timer, UP (temperature higher, add time, Fahrenheit to Celsius switch), and DOWN (temperature lower, adjust time, Fahrenheit to Celsius switch). The display shows the current temperature and operational status. A Remote Control is also included, offering comprehensive control over power, Celsius/Fahrenheit exchange, fan speed (high, low), mode selection (auto, cool, max cool, sleep), and timer settings. The unit is designed with castors for easy portability.

Maintenance Features:

Regular maintenance is crucial for the appliance's longevity and efficiency.

Cleaning: Before any cleaning or maintenance, the unit must be turned off and unplugged to prevent electric shock. The housing should be cleaned with a soft, moist cloth, avoiding chemical solvents that could damage the plastic case. Water should not be sprinkled on the unit.
Air Filter: The air filter needs to be cleaned every 2 weeks to prevent dust blockage and maintain efficiency. To clean, open the air filter cover upwards, remove the filter, wash it gently in warm water (about 104°F) with a neutral detergent, rinse, and dry thoroughly in a shaded place before reinstalling.
Water Drainage: The self-evaporative system handles most condensing water. However, if the internal water tank becomes full (indicated by "FL" on the display), the compressor will stop. Users must turn off the machine, move it to a suitable drainage location, and unplug the water-draining hole to empty it.
Storage: For storage, the unit should be drained of water, run in Fan mode for two hours to dry the interior, turned off and unplugged, and the air filter cleaned and reinstalled after drying. The exhaust pipes should be removed and stored carefully. Finally, the unit should be wrapped in a plastic bag and kept in a dry place.

Safety Precautions:

The manual emphasizes several safety guidelines:

Use the appliance only for domestic purposes and as indicated in the instructions.
Do not use outdoors or in wet environments.
Regularly check the cord, plug, and appliance for damage.
Avoid using extension cords unless checked by a qualified electrician.
Keep away from hot sources and direct sunlight.
Always switch off and unplug before cleaning, changing parts, or when not in use.
Ensure the voltage rating matches the main voltage.
Keep children away from the unit and never leave it unsupervised.
Do not pull the cord to unplug or move the appliance.
Never immerse the appliance in water or other liquids.
Keep away from water or oil splashes.
Do not insert sharp metallic objects or fingers into air vents.
Do not attempt repairs yourself; only qualified personnel should perform repairs or cord changes.
Do not use accessories from other manufacturers.
Install on a level surface with adequate space, avoiding obstacles.
Ensure the plug is accessible after installation.
Always place the appliance in a vertical position.
Do not use near gas or inflammable liquids.
Do not block air outlet and inlet ventilation.
Avoid using sprays (insecticides, painting) or other inflammable products near the appliance.
Ensure the AC outlet is in good working condition.
Do not plug in with an AC adaptor.
Plug into the wall socket before switching on.
The manufacturer is not responsible for non-adherence to instructions.
In case of abnormal operation, switch off, unplug immediately, and contact a qualified electrician.