7
Programming
GRINDER SET - Allows you to set the coarseness of the coffee grind. The selection ranges from -----0 (most
fine) to 0+++++ (most coarse) and 0 corresponds to the preset factory level.
Please note:
Increasing the coarseness will increase the amount of coffee consumed. Make any changes in small
increments and make a cup of coffee after each change to check the setting.
To prevent a fault where the coffee cannot be compressed, you should decrease the grinding time as you
increase the fineness of the grind. Make any changes in small increments and make a cup of coffee after each
change to check the setting.
COFFEE TEMPERATURE – allows you to set the temperature for coffee. The selection ranges from 85ºC to
95ºC and 90ºC corresponds to the preset factory level.
STEAM TEMPERATURE – allows you to set the temperature for steam. The selection ranges from 110˚C to
130˚C and 120ºC corresponds to the preset factory level.
To Next Page
Loading...