CDA FW223 - Appliance Dimensions and Fitting Brackets; Fitting Spacer Pieces

8
fig. 6
fig. 4
fig. 5
600
min
550
820-
890
595
548
min 25
819-
889
100- 170
5
6
11
11
11
11
Installation
Fig. 4 - Dimensions of the appliance
Fig. 5 - Fitting the worktop bracket
Remove the screw (5) on the top of the appliance, locate the top bracket(6)
and fix the bracket with screw(5).
Fig.6 - Fitting the spacer piece
Take out the spacer piece (11) located on the side panel and remove the
protective tape. Stick the spacer piece on the opposite side to the door
hinges of the appliance.