10
C. Freezer Temperature Display
In normal running this shows the actual temperature in the freezer
compartment. If the temperature in the freezer is higher than 0°C this
will flash, otherwise it will be static.
See below for how this display is used in setting the freezer
temperature.
D. Super Freeze Display
The super freeze function can be used to freeze large quantities of
fresh food as quickly as possible. Fig 3 shows how this display looks
when the super freeze is switched on.
To switch on the super freeze function, push and hold the freezer
button (E) for three seconds.
Once the food is frozen, push and hold the freezer button (E) for three
seconds again to switch o the super freeze function.
IMPORTANT Do not use the super freeze function for more than 24
hours at a time.
E. Freezer Button
The freezer temperature is regulated by this button between -25°C
and -15°C in 1°C increments.
To change the temperature setting, press this button once so the
display shows the set temperature and flashes. While it is still flashing,
press this button several times until the required temperature is
shown on the display. Approximately 5 seconds after your last press
of this button the new temperature is set and the display changes
back to showing the actual temperature inside: it will continue to flash
if the actual temperature in the freezer is above 0°C, and until the
actual temperature falls below zero.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
