CDA FWC152 User Manual

10
Use
Internal Humidity
The wine coolers (except for
the FWC152) are equipped with
a humidity system to maintain
optimal humidity within the wine
cooler.
Fill the humidity reservoir approximately 3/4 full with water.
Place the reservoir on the runners on the top shelf as shown in fig. 3.
Ensure it is located correctly to prevent water spillage.
Check the water level regularly and refill if required.
Temperature display
The temperature display will show the current internal temperature.
The display flashes:
• When a dierent temperature is being set
• If the internal temperature is +/- 5˚ away from the set temperature.
This serves as a warning to prevent damage to the contents of the
appliance should the temperature be too high.
Dynamic Cooling and Silent modes
The appliance has two dierent running modes.
Silent mode
Once the required temperature is reached, the appliance will run without
the fan. The wine cooler is factory set to silent mode.
Fig. 3

CDA FWC152 Specifications

General

Brand	CDA
Model	FWC152
Category	Kitchen Appliances
Language	English