12
Care and Cleaning
IMPORTANT:
Always disconnect the
appliance from the mains
electrical supply before any
cleaning or maintenance.
Removing the shelves
(Applicable to
FWC303, FWC603 and FWC623)
• To remove a shelf from the wine cooler, first remove all bottles from
the shelf, then pull the shelf forwards until the groove on either side
of the shelf is level with the plastic peg on either side of the cabinet
(as shown in fig 4). Then lift the shelf up and pull forwards.
• To replace the shelves, follow the steps above in reverse order.
• Do not use abrasive products or detergents. After washing, rinse
and dry thoroughly.
• The exterior of the appliance and the door seal should be cleaned
using mild soapy water and dried thoroughly.
• The interior cabinet should be cleaned using a solution of
bicarbonate of soda and lukewarm water.
• Clean the shelves separately by hand using soap and water. Do not
put them in the dishwasher.
• Ensure that the cloth is only moist when cleaning the control
panel and electrical parts, and that all water is thoroughly dried
o before reconnecting the power.
Fig. 4