ACCESSORIES APPENDIX A
A-69
SURETEST Torque Calibration System
Components and Inventory Control
Component Description Drawer-Cutout
2000-100-02* Roll cabinet
2000-100-2 Foam insert 6
2000-100-3 Foam insert 7
2000-100-4 Foam insert 8
2000-100-5 Foam insert 9
2000-100-7 Foam insert 3
2000-100-8 Foam insert 4
2000-600-02 Manual torque loader
2000-600-10 Loader
2000-560 Plexiglass safety shield
2000-111-0 Indicator stand
2000-173-1 Reaction pin assembly 8-C
2000-173-2 Reaction pin assembly 8-C
343-50-02 Standoff fixture 9-A
2000-173-11 (2) Linear ball bearing
2000-173-6 Reaction ball handle adaptor 8-B
QC2I75** Torque wrench 7-D
QJ024** 3/4" Open end adaptor 7-B
QIJR50** 3/8" Interchangeable ratchet head 7-C
FA12E** 3/8" x 3/8" Hex driver bit 7-C
2000-114 110VAC Power cord 3-D
2000-118 220VAC Power cord - Europe
2000-119 220VAC Power cord - Australia
2000-120 220VAC Power cord - Great Britain
2000-195-12 Quick Release (2) 8-I
9502-610-02 Digital torque indicator kit
2000-110-01 Base Unit
2000-114 110VAC Power cord 3-F
2000-118 220VAC Power cord - Europe 3-F
2000-119 220VAC Power cord - Australia 3-F
2000-120 220VAC Power cord - Great Britain 3-F
2000-116 Cable, Indicator to transducers 3-B
2000-117 Cable, Base Unt to loader 3-E
*The 2000-100-02 roll cabinet is fitted with 1" thick foam inserts for storage and
effective tool control. Storage space is also available for calibration hangers, torque arms
and small weights.
**Used for calibration plate and internal drive plate installation on the 2000-13-02 and
2000-14-02 transducers. Item is not available from Consolidated Devices, Inc.
To Next Page
Loading...
