CDI TORQUE CDI-SURETEST User Manual

Explains text conventions used in the manual for clarity.

Explains how chapters are referenced for additional information.

Describes signals indicating potential equipment damage.

Explains the structure and types of safety messages provided.

General safety and operating instructions for the SURETEST system.

Stresses the importance of reading all safety messages provided.

Describes the SURETEST Base Unit and Transducers.

Details the Manual Loader and Roll Cabinet components.

Lists major hardware components of the base unit.

Details the front panel controls, display, and operation.

Details rear panel connectors and their functions.

Explains transducer specifications and capabilities.

Lists overall system technical specifications.

Outlines the SURETEST Torque Calibration System setup.

Describes connections on the rear panel for system setup.

Step-by-step guide for initial system configuration.

Explains base unit controls and powering sequence.

Details installing 4-in-1 and single transducers.

Covers setting date, time, and limits.

Configures automatic clear, store, and send functions.

Explains how to manage the data list memory.

Procedures for testing torque tools.

Guidance on choosing and installing transducers.

Specifics for testing dial and bending beam types.

Instructions for testing adjustable/preset click wrenches.

Procedures for testing power and non-impact tools.

How to view statistical data on the LCD.

How to print statistical results.

Viewing and downloading recorded data lists.

How to use analog output for monitoring calibration.

Describes how to mount transducers for calibration.

Details calibration setup for different torque ranges.

Specific mounting instructions for the 4-in-1 transducer.

A rapid check of transducer functionality before calibration.

Step-by-step guide for calibrating transducers.

Steps for calibrating the indicator unit itself.

Discusses gravity's effect on calibration and correction factors.

Explains methods for correcting calibration readings and weights.

Details loader use, power requirements, and rotation.

Describes the loader's components and overall function.

How to mount transducers to the loader.

Describes ball handle adapter and optional transducers.

Explains controls on the loader's rear panel.

Specific mounting instructions for the 4-in-1 transducer.

Describes the function and use of the extension arm.

Discusses testing torque drivers and multipliers.

Illustrates how accessories are stored in the roll cabinet.

Lists system parts and their storage locations.

Details available transducers, adapters, and kits.

Lists accessories specifically used for calibration.