CDI TORQUE CDI-SURETEST - Calibration Accessories List

ACCESSORIES APPENDIX A
A-72
Calibration Accessories
Calibration of the 2000-610-02 Indicator and SURETEST series transducers is
recommended at least every 1 year.
Component Description Drawer-Cutout
2000-250-02 Calibration stand kit
2000-250-0 Stand
2000-150-02 Transducer mounting block
2000-152-3 3/8" Square drive adaptor 7E
S2000-221-0 1-1/4" Square drive adaptor 7E
2000-154-8 1-1/4" - 3/4" Drive reducer 7E
2000-320-0 200 in oz - 2000 ft lb Weight Kit
For This Kit Calibration Equipment
Hangers
2000-151-4 “ S “ Hook 7-A
2000-301 1/2 lb Weight hanger 7-A
2000-304-0 7.5 lb Weight tray 7-A
2000-302-0 15 lb Weight tray 7-A
2000-303-0 50 lb Weight tray 7-A
Torque Arms
2500-50-0 2.5" Radius wheel
2000-151-0 5" Radius wheel
2000-152-0 10" Radius butterfly
2000-154-0 40" Calibration arm
Weights
2500-310-1 0.3 oz Hook (1) 6
2500-310-2 0.5 oz Hook (1) 6
2000-310-2 2 oz Bob (1) 6
2000-310-3 4 oz Bob (1) 6
2000-300-2 1/2 lb Disk (1) 6
2000-300-3 1 lb Disk (2) 6
2000-300-4 2 lb Disk (4) 6
2000-300-5 5 lb Disk (6) 7
2000-300-6 10 lb Block (4)
2000-300-7 20 lb Block (4)
2000-300-8 50 lb Block (4)
2000-321-0 200 in oz - 250 ft lb Weight Kit
For This Kit Calibration Equipment
Hangers
2000-301 1/2 lb Weight hanger
2000-304-0 7.5 lb Weight tray
2000-302-0 15 lb Weight tray
Torque Arms
2000-50-02 2.5" Radius wheel
2000-151-0 5" Radius wheel
2000-152-0 10" Radius butterfly