FUNCTIONAL DESCRIPTIONS AND SPECIFICATIONS CHAPTER 2
The loader accepts all SURETEST series single transducers directly. Use a 2000-500-02
adapter kit to mount the optional 2000-400-02 4-in-1 transducer. For additional
information refer to Appendix A–Accessories.
Loader
Use the 2000-600-02 Manual Loader for testing and calibrating all torque wrenches,
drivers, torque multipliers, non-impact pneumatic and electric nut runners. Loader
components are:
• Stand For Base Unit
• Safety Shield
• Hand Crank
• Transducer Mounting
Roll Cabinet
The roll cabinet features nine heavy duty drawers with ball bearing slides, locking wheels
and drawer locks. SURETEST accessories are stored in the roll cabinet which is fitted
with foam inserts for easy inventory control. The nine drawers are assigned and arranged
as shown in figure A-1 of Appendix A.
SURETEST Base Unit
This section describes the major hardware components of the SURETEST Base Unit,
including:
• Front Panel
• Rear Panel (Input/Output)
• SURETEST Torque Transducers.
To Next Page
Loading...