MANUAL LOADER CHAPTER 6
6-60
Use the 2000-600-02 Manual Loader to test torque wrenches. Refer to Figure 6-2 for an exploded
view of the Loader and components.
Figure 6-2: 2000-600-02 Manual Loader, Exploded View
A- Transducer Mounting
A transducer facilitates the low-to-high ranges of the wrench under test. The transducer must be
installed into the loader by lining up the red mark with the "TORQUE" label on the loader and
securing it using two quick release pins.
To Next Page
Loading...
