To Next PageTo Next Page
Need help?Do you have a question about the CEA INC37 and is the answer not in the manual?
Explains the modular heated towel rail made of AISI 304 stainless steel and its design.
Details the main components: TRSO1, SELO1, SELO2, and BOTO3 used in product configurations.
Illustrates various assemblies of electric towel warmers without the power button included.
Presents assemblies of electric towel warmers that include the power button (BOTO3).
Shows configurations of the towel warmer with and without a power button and power supply unit.
Notes that EQUILIBRIO is compatible with home automation systems.
Covers general warnings regarding safe installation, use, and maintenance of the appliance.
Provides age-specific instructions and supervision requirements for children using the appliance.
Details procedures for qualified technicians, wiring, and permanent connections with heat-resistant sheaths.
Specifies using the indicated power supply, its placement in a junction box, and box dimensions.
Advises on installation temperature, distance from outlets, potential odors, and keeping combustibles away.
Covers product damage, using original spare parts, and handling faults or disuse.
Covers durability, maintenance, packaging safety, intended use, and child supervision.
Details electrical safety, earthing, mains wiring capacity, direct connection, and power supply specifications.
Covers appliance heat, keeping combustibles away, installation height, and potential bad smells.
Addresses appliance damage, use of original parts, fault handling, and safe disuse.
Provides detailed dimensions for the unit, junction box, and cable management requirements.
Details the input/output voltage, current, and maximum power supported by the power supply unit.
Specifies placement requirements for the towel warmer and junction box relative to bathroom safety zones.
Mandates a minimum installation height of 600 mm for the lower element for safety and product protection.
Instructions on placing the junction box within an accessible panel and preparing corrugate pipes.
Details the vertical installation of the power supply unit inside the junction box as shown in figures.
General| Brand | CEA |
|---|---|
| Model | INC37 |
| Category | Plumbing Product |
| Language | English |
