EasyManua.ls Logo

Ceccato Olindo BIO-SPRINT 230 - User Manual

Default Icon
72 pages
Go to English
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Ceccato olindo macchine agricole s.n.c.
di Ceccato Ilario & Figli Via Giustiniani, 1 35010
Arsego di San Giorgio delle Pertiche PD italiy
tel. +39 049 5742051 fax +39 049 5742673
www.ceccato-olindo.it
info@ceccato-olindo.it
Aprile 2013
MANUALE USO E MANUTENZIONE
OPERATING AND MAINTENANCE MANUAL
MANUEL D’USAGE ET ENTRETIEN
Macchina Machine
:
BIOTRITURATORE–CIPPATRICE– SHREDDER -
CHIPPER
Modello Model Modèle
:
BIO-SPRINT 230
BIO-SPRINT 400
TRI-230
TRI-400
TRI-GX200
TRI-GX390
TRI-PTO
TRI-PTO-MAXI
Matricola Registration Matricule:
Data di consegna Delivery date Date de livraison:
Proprietario Owner Propriétaire:
nome name nom
indirizzo address adresse

Table of Contents

Questions and Answers

  • S
    Steven MartinezAug 9, 2025
    Why does my Ceccato Olindo BIO-SPRINT 230 engine suddenly stop?
    • R
      Rachel FloresAug 9, 2025
      The engine of your Ceccato Olindo Paper Shredder might stop suddenly due to a power failure. Check the line voltage. It could also be due to the thermal sensor trigger switch; in this case, reset the internal thermostat in the engine casing, cut off power or shut down the fuel, and remove any excess material stuck in the shredder. Another cause could be too much material being introduced.
  • R
    Robert HarrisonAug 23, 2025
    What to do if Ceccato Olindo BIO-SPRINT 230 Paper Shredder TRI H 6.5 engine stops and has excess vibration?
    • A
      amber44Aug 23, 2025
      If your Ceccato Olindo Paper Shredder TRI H 6.5 engine stops and vibrates excessively, it could be due to a lack of fuel; check the fuel level and top up the tank. Alternatively, loose parts may be the cause. In this case, cut off power or shut down the fuel and verify the correct fixing of various components, or replace any damaged or worn blades. Wrong assembly or broken cutting blades could also be the cause.

Summary

WARRANTY

SAFETY STANDARDS

Stickers on the machine

Stickers and pictograms advise operator on specific situations. Ensure good condition and learn their meaning.

USE OF THE MACHINE

Controls and advice before starting work

Verify machine integrity, positioning, and safety devices. Check AC outlet capacity and power cable connection.

The machines safety system

Safety systems allow immediate stopping to avoid injury or damage. When prevention is used, the machine halts.

Machine controls

OPERATORS GUIDE

Testing

Calibrating, regulating and checking for machine utilisation

Commissioning

Malfunctions and Troubleshooting

Lists simple and probable faults that may compromise safety and operation, with their remedies.

MAINTENANCE AND REPAIRS

Periodic maintenance

Covers daily, weekly, and 2000-hour maintenance tasks like cleaning, checking parts, and fitting.

Maintenance of the grinding mass

HANDLING AND TRANSPORT

Transporting the machine

CONNECTING TO POWER SOURCES

Electrical connection

Connect according to model to 220 Volt 50 Hz 1 ph + ground, using a circuit breaker. Requires qualified electrician.

TECHNICAL SPECIFICATIONS

Ceccato Olindo BIO-SPRINT 230 Specifications

General IconGeneral
BrandCeccato Olindo
ModelBIO-SPRINT 230
CategoryPaper Shredder
LanguageEnglish