Need help?Do you have a question about the Ceco DEAN PUMP RA Series and is the answer not in the manual?
Inspect pump for damage upon arrival and note any issues on the bill of lading.
Protect pumps from moisture, dirt, and damage during storage. Seal openings and fill with inhibiting liquid.
Lists materials used for pump components across different models (RA2096, RA3146, RA3186).
Ensure pump is selected for correct service and review requirements before reapplication.
Foundation provides rigid support and maintains alignment for the pumping unit.
Steps for properly mounting the baseplate, leveling, and aligning the pump and driver.
Details on checking and correcting pump and driver shaft alignment for optimal performance.
Specifies allowable forces on suction and discharge flanges for different pump models.
Lists maximum allowable moments applied to the pump on a bolted and grouted baseplate.
Illustrates and labels small piping connections for RA series pumps.
Describes lubrication requirements for radial and thrust bearings in RA pumps.
Explains the mechanical seal and the use of barrier fluid for oxidizing oils.
Details modifications for using nitrogen as a barrier fluid for mechanical seals.
Procedures for filling the pump with liquid, including venting air.
Warnings and guidelines for safe pump operation, including avoiding shut-off conditions.
Information required for ordering spare parts, including pump serial number and part details.
Exploded view and part list for Type RA pumps, identifying components by part number.
Sectional assembly drawing for the RA2096 pump model.
Sectional assembly drawing for the RA3146 pump model.
Step-by-step guide for safely dismantling the pump components.
General| Brand | Ceco |
|---|---|
| Model | DEAN PUMP RA Series |
| Category | Water Pump |
| Language | English |
To Next Page
