The Bamba CeramicCare AirGlam is a versatile hair styler designed for domestic use, offering multiple functions for hair styling and drying. It comes with a range of interchangeable heads to achieve various looks, from curling to straightening and drying.
Function Description
The Bamba CeramicCare AirGlam functions as a multi-purpose hair styler, utilizing the Coandă effect for curling and offering different brushes for straightening and drying. It is designed to be user-friendly with adjustable air speed and temperature settings, as well as a cold air shot function to set hairstyles. An automatic cleaning function helps maintain the appliance's performance.
Important Technical Specifications
- Product Reference: 03467 (also 04452/03457/03458/03459 for other models like AirGlam W/AirGlam X/AirGlam Y)
- Power: 1300-1400 W
- Voltage and Frequency: 220-240 V~, 50/60 Hz
- Heads Included: 8 heads, including:
- Left curling barrel
- Right curling barrel
- Spiked straightening brush
- Plate straightening brush
- 50-mm round brush
- 33-mm round brush
- Drying head
- 60-mm oval brush
- Cable: 360° rotating cable for ease of use.
- Safety Features:
- Automatic shutdown in case of overheating.
- Recommended installation of a Residual Current Device (RCD) with a rated operating fault current not exceeding 30 mA in bathrooms for additional protection.
- Warning symbol for hot surface.
Usage Features
General Operation:
- Preparation: Wash, condition, and towel-dry your hair before use.
- Power Connection: Ensure the mains voltage matches the device's rating and the plug is earthed. Plug the appliance into a power supply.
- Head Attachment: Align the desired head with the air outlet and turn it to fix it to the appliance's body. To remove a head, slide the release tab down, rotate the head, and gently pull it off.
- Switching On/Off: Press and hold the on/off button to switch the appliance on or off. The device defaults to air speed and temperature setting 1, but it saves the last used settings for future use.
- Air Speed Adjustment: Repeatedly press the air speed change button to cycle through three speed settings. LEDs indicate the selected speed (1 LED for speed 1, 2 LEDs for speed 2, 3 LEDs for speed 3).
- Temperature Adjustment: Repeatedly press the temperature change button to cycle through three temperature settings. LEDs indicate the selected temperature. Pressing the button again activates cold air (indicator lights go out), and pressing it once more returns to temperature setting 1.
- Automatic Cleaning Function: With the appliance switched off, press and hold the temperature change button for 5 seconds. The dryer will blow air out of the air inlet grille for 20 seconds to clean it.
Using the Curlers:
- Ensure your hair is at least 85% dry.
- Place the curler on the side of the head you wish to curl first.
- Separate hair into approximately 2 cm strands.
- Select a warm or hot temperature setting.
- Bring the end of a hair strand close to the curler; the Coandă effect will attract and curl the hair.
- Hold the hair on the curler for a few seconds, then release a shot of cold air to set the style.
- Switch off the appliance and unwind the hair from the top. Repeat for all hair on that side of the head.
- Replace the curler with the one suitable for the opposite side of the head and repeat the process.
After Use:
- Turn off and unplug the appliance.
- Place it on a heat-resistant surface to cool down.
- Remove any hair and dust from the appliance and attachments.
- Ensure air inlets and outlets are clear.
- Clean the appliance with a soft cloth and store it in a dry place.
Maintenance Features
General Cleaning and Maintenance:
- Before Cleaning: Unplug the appliance and allow it to cool down completely.
- Surface Cleaning: Use a soft, damp cloth to clean the device's surface.
- Immersion: Do not immerse the appliance, cable, plug, or any non-removable parts in water or other liquids.
- Abrasives: Do not use abrasive cleaners or scouring pads.
- Cable Care: Do not twist, bend, pull, or damage the power cable.
- Hair Removal: Clean any dirt and hairs that may clog the device.
Cleaning the Filter:
- Turn the air-inlet filter cover to unlock it.
- Gently pull the cover downwards.
- Use a soft brush or a cotton swab to clean the air inlet and the filter.
- Refit the cover by turning it to lock it back in place.
Safety Warnings:
- Do not use the device in bathtubs, showers, sinks, or any other water-filled containers.
- Keep face, neck, and scalp away from the device during operation.
- Do not leave the device on any surface while in operation.
- Do not use the appliance to comb wigs, natural hair extensions, fake hair, or animal hair.
- Ensure air inlets are not covered or obstructed to prevent overheating. Do not insert objects into the air inlet.
- Regularly check the power cable for damage. If damaged, it must be replaced by the official Cecotec Technical Support Service.
- Unplug the appliance immediately in cases of abnormal operation, for cleaning, or after use.
Need help?
General
To Next Page