cecotec BAMBA PRECISIONCARE PRO - Page 51

Input AC frequency 50/60 Hz
Specified by the manufacturer. Shall be a value or
a range.
Output voltage 5.0 V
Nameplate output voltage. Shall indicate whether is
AC or DC.
In cases where more than one physical output or
more than one output voltage at load condition 1 are
measured, the sets of available Output voltage —
Output current – Output power shall be published.
Output current 1.0 A
Nameplate output current.
In cases where more than one physical output or
more than one output voltage at load condition 1 are
measured, the sets of available Output voltage —
Output current – Output power shall be published.
ENGLISH
BAMBA PRECISIONCARE PRO
49