EasyManua.ls Logo

cecotec BAMBA PRECISIONCARE PRO - Product Operation Guide; Operational Warnings and Guidelines; Beard Trimmer Comb Usage; Attachment Changing Procedure

cecotec BAMBA PRECISIONCARE PRO
57 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3. OPERATION
Warning
Use the device only on dry hair.
- Maximum charge: 90 minutes.
- Full charge: display shows “60”.
- Charging: it shows the battery minutes and “Min”. Battery will
be shown in 5 min intervals: 00, 05, 10, 15, 20, 25, 30, 35, 40,
45, 50, 55, 60 MIN.
- During operation, it will show the battery power and will
count down in 5-minute intervals.
- Lock operation: hold down the button for 3 seconds to lock
or unlock the device.
- The device has an overcharge and discharge protection
function.
Using the comb for the beard trimmer
- The length of the cut may vary depending on
the trimming angle.
- Begin with a comb attachment for a longer cutting length and
then use progressively shorter cutting lengths as you cut hair.
- Assemble the 1-16 mm guide comb for the beard trimmer. Fig. 2
- Insert the comb attachment into the grooves on the sides of the
device according to the below image.
- Press the comb release button on the back to insert or release
the comb attachment. Fig. 3
Changing the trimmer attachment
Warning
- To remove the trimmer attachments, use your thumb to push
the attachment backwards and remove it from the device.
- To ass
emble a new attachment, align it with the device’s back
part and press downwards on the attachment’s top part until it
ENGLISH
BAMBA PRECISIONCARE PRO
41

Related product manuals