Efficiency at low load
(10 %)
-- %
Declared by the manufacturer based on the value
calculated at load condition 5.
External power supplies with a nameplate output
power of 10 W or less shall be exempted from this
requirement.
In cases where multiple average active efficiencies
are declared for multiple output voltages available
at load condition 1, the value published shall be the
value declared for the lowest output voltage.
No-load power
consumption
0.038 (for 115V/60Hz)
0.054 (for 230V/50Hz)
W
Declared by the manufacturer based on the
value measured for load condition 6.
ENGLISH
BAMBA PRECISIONCARE PRO
51
To Next Page
Loading...
Need help?
General
