SKINCARE
43
ENGLISH
skin or the device will automatically stop.
4. If the skin turns red or painful while using the device on it, stop
immediately.
5. Do not stay on the same part for more than 2-3 seconds.
6.
7. Wipe the skin with a towel after use to remove the cuticles
that remain.
8. Improper use of the device can lead to skin damage.
Replacing the rolling head
1.
2. Take the head from the sides and pull it with the plastic clip
1. Add water on the part where the device is going to be used to
soften it.
Note
If the part is wounded or there is blood on it, do not use the device.
2.
enter the slow speed mode. The light indicator will turn green.
The light indicator will turn red.
3. Place the device on a dry area and rotate the rolling head in all
directions for 2-3 seconds. Do not press too hard against the
To Next Page
Loading...
