cecotec BIGDRY 3000 PURELIGHT User Manual

1. PARTS AND COMPONENTS
Fig.1
1. Filter cover
2. High-efficiency filter
3. Air-purification inlet
4. Front shell
5. Air outlet
6. Control panel
7. Back shell
8. Air-dehumification inlet
9. Water-tank float
10. Water-tank cover
11. Water-tank hole cover
12. Water tank
13. Water-tank handle
14. Power cord
Fig. 2
Control panel
1. Power/purifier button
2. Dehumidifier button
3. Mode button
4. Operating indicator light
5. Full water tank indicator light
2. BEFORE USE
Take the product out of the box and remove all packaging material.
Make sure all parts and components are included and in good conditions. If any visible signs of
damage are observed, contact the Technical Support Service immediately.
Always keep the dehumidifier in an upright position to avoid leakages.
When installing the device, ensure a minimum safety distance of 30 cm to each of its sides.
3. PRODUCT ASSEMBLY
Filter installation/replacement
When the machine detects that the filter needs changing, the LED indicator for the air purifier
will continuously flash in orange.
05614 / 05615_Deshumidificador BigDry 3000 PureLight / Black_Manual_YV01200515.indd 2105614 / 05615_Deshumidificador BigDry 3000 PureLight / Black_Manual_YV01200515.indd 21 22/5/20 13:3422/5/20 13:34

cecotec BIGDRY 3000 PURELIGHT Specifications

General

Brand	cecotec
Model	BIGDRY 3000 PURELIGHT
Category	Air Cleaner
Language	English