Why is my cecotec CECOFRY DUOHEAT 6000 Fryer not working?
Your Cecotec Fryer might not be working because it is not plugged into an earthed wall socket. Ensure the appliance is properly plugged in. Another reason could be that the timer hasn't been set. Set the timer to the desired cooking time to start the fryer.
What to do if the food is not fully cooked in my cecotec CECOFRY DUOHEAT 6000 Fryer?
If your food isn't fully cooked in the Cecotec Fryer, it could be due to several reasons. First, the amount of ingredients in the basket might be too large; try cooking smaller batches for more even cooking. Second, the temperature selected might be too low; increase it to the required setting. Third, the preparation time may be too short; extend it to the desired duration. Finally, if your fryer has a double heating element, ensure the lower element is activated for extra heat.
Why is white smoke coming out of my cecotec CECOFRY DUOHEAT 6000 Fryer?
White smoke coming from your Cecotec Fryer is likely due to preparing greasy ingredients, which causes a large amount of oil to leak into the basket drawer. This oil produces white smoke, and the basket drawer may heat up more than usual. This does not affect the fryer or the result. It can also be caused by leftover grease in the basket drawer. Make sure you clean the device properly after each use.
How to fix unevenly fried ingredients in Cecotec Fryer?
Some foods need to be stirred during cooking. For ingredients that lie on top of each other, such as chips, shake them halfway through the cooking time to ensure they are fried evenly in the Cecotec Fryer.
General| Type | Air Fryer |
|---|---|
| Capacity | 6 L |
| Temperature Range | 80 - 200 °C |
| Timer | 60 min |
| Control Type | Digital |
| Programs | 8 preset programs |
| Dual Heating System | Yes |
| Oil Container | No |
| Weight | 5.5 kg |
Proper procedures for storing the air fryer to ensure its longevity.
To Next Page