cecotec CHILLIN'ICE 1200 GO - Parts and Components; Before Use; Operation

CHILLIN'ICE 1200 GOCHILLIN'ICE 1200 GO
4342
ENGLISH ENGLISH
- 
could damage the compressor and the sealant.
- 
and make sure that the power cable as well as the plug are not damaged.
- 

of the appliance and the wall. Do not it place near ovens, radiators, or other heat sources.
- 
- Make sure that the domestic power supply matches the one indicated on the appliance.
- When the room temperature is below 15 ºC, it is recommended to select the small ice cube
size. When the room temperature is above 30 ºC, it is recommended to select the large ice
cube size.
- Do not use chemicals, acidic or alkaline liquids to make ice.
Box content
- Ice maker
- Ice scoop
- Instruction manual
3. OPERATION
Control panel
1. 


appliance will start making ice cubes.
2. 
or small).
3. 
When this happens, add water into the tank and press the power button to restart the
appliance.
4. Ice collecting container full indicator light: it lights up when the sensor detects that
the amount of ice has reached the maximum storage capacity of the container. In
addition, when the sensor is activated, the appliance stops the production of ice cubes
automatically. When this happens, empty the ice cubes from the container. As soon as

Operation
1. Open the lid, remove the ice cubes container, and add water to the tank.


Fig. 1
1. 
2. 
3. Ice collecting container
4. Control panel
5. Front housing
6. 
7. Evaporator
8. Ice dispenser panel
9. Handle
10. Back housing
11. Ventilation outlet
12. Ice scoop
Control panel. Fig. 2
1. Power button
2. Empty water tank indicator light
3. Large ice cube size indicator light
4. Small ice cube size indicator light
5. Ice collecting container full indicator light
6. Ice cube size selection button


device.
2. BEFORE USE
- 
out of its box and remove all packaging materials. You can keep the original box and other

when transporting it in the future. In case the original packaging is disposed of, make sure
all packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any

immediately.