cecotec CLASSICTOAST 15000 BLUE EXTRA DOUBLE - Parts and Components; Before Use; Operation

CLASSICTOAST 15000 BLUE / BEIGE / YELLOW
31
ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1. 2 38-mm wide slots
2. Cool-touch body
3. Toast lever knob/Display
4. One-touch crumb-collecting tray
5. Stop button
6. Reheat button
7. Defrost button
8. Toast lever
9. Bun warmer
2. BEFORE USE
Take the product out of the box.
Remove all packaging materials. Keep the original box.
Make sure all the components are included and in good conditions, otherwise, contact
immediately the ocial Technical Support Service of Cecotec.
Before using the toaster for the rst time, it is important to perform a toasting process
without bread. We recommend 4 or 5 times. Press the toast lever until it latches into place.
When the toasting is nished, the toast levers automatically jump up. The toaster is now
ready to be used with bread.
Warning: A slight odour and smoke might appear when heating the device for the rst
time. This is due to manufacturing materials residues and does not aect the appliance’s
operating.
3. OPERATION
Introduce the slices of bread in the slots.
Use the power knob to select the desired toasting grade. There are 6 dierent levels, from 1
(Light toasting) to 6 (Dark toasting).
Note: Set level 3 (Medium toasting) for brown results.
Push the toast lever down until they latch into place. The stop indicator light will turn on and
the toasting process will start.
The toasting setting can be adjusted while operating. The display will show the chosen
toasting setting and a countdown will start automatically, depending on the toasting setting.
The toaster will switch o automatically after the timer nishes and the toasts will be ejected
from the slots.