To Next PageTo Next PageWhy is my Cecotec Exercise Bike making a loud noise from moving parts?
If your Cecotec Exercise Bike is producing loud noises, it's likely that some parts aren't tightened properly. Make sure to tighten all the components to resolve this issue.
What to do if the handlebar is not stable on my cecotec DRUMFIT INDOOR 10000 MAGNETIC CONNECTED Exercise Bike?
If the handlebar of your Cecotec Exercise Bike feels unstable, the bolts might be loose. Ensure that you tighten them to secure the handlebar.
How to fix an unstable base on my Cecotec Exercise Bike?
An unstable base on your Cecotec Exercise Bike can result from a few issues. First, check if the ground is uneven or if there's anything under the stabiliser and remove it. Also, make sure the rear stabiliser end caps are tightened and properly adjusted.
Instructions for removing pre-installed stabilizer screws and aligning the main frame.
Steps for aligning holes and using adjustment knob and washer to secure the saddle post.
Securing the handlebar with screws, washers, and adjustment knobs.
Using the spanner to install pedals on the crank and tighten them.
How to adjust the resistance level using the adjustment knob on the main frame.
Steps to adjust saddle height using the adjustment knob on the main frame.
Guide to searching, downloading, and installing the Kinomap app for training.
General| Brand | cecotec |
|---|---|
| Model | DRUMFIT INDOOR 10000 MAGNETIC CONNECTED |
| Category | Exercise Bike |
| Language | English |
