12 FORCESILENCE 500/510
ENGLISH
2. Now release the telescopic tube (8) by loosening the adjustment screw (9).
3. Now assemble all the fan pieces together (3, 14, 2 15, 16, 17, 1 and 18) in the central hub (12 .
4. Place the motor compartment (6 and 13) and the fan set, and x both on top of the
telescopic tube (8).
4. OPERATION
The fan can only be operated by the manual control located on the fan.
1. To activate the oscillation mode press or push the button (5).
2. To adjust the fresh air direction, you can move the fan head up or down.
3. You can adjust the fan speed to desired level:
0: Disconnected / 1: Low speed – 2: Medium speed – 3: High speed
5. CLEANING AND MAINTENANCE
1. Always disconnect the appliance from the mains by switching it off and remove the plug
from the power outlet before cleaning.
2. Before use every year, please open the motor cover and pour several drops of lubricant oil
or sewing machine oil into the motor bearing. Don’t use wet cloth to clear the motor unit.
Keep the fan clean and store in dry place to avoid moisture.
3. It is advisable to use a neutral detergent and a soft cloth and to rub softly. Do not use
solvents, acidic detergents, petrol or alcohol etc., to clean the plastic components as
these, could be deformed or damaged.
4. Use a vacuum cleaner to remove the dust from the safety grill. Never take the safety grill away.
5. Do not allow water to penetrate the motor during cleaning.
6. TECHNICAL SPECIFICATIONS
Model: FORCESILENCE 500/510
Product reference: 05201/05202
Power: 40 W
Power Supply: 220-240 V~50 Hz
Made in China | Designed in Spain
7. DISPOSAL OF OLD ELECTRICAL APPLIANCES
The European directive 2012/19/EU on Waste Electrical and Electronic Equipment
(WEEE), species that old household electrical appliances must not be disposed of
with the normal unsorted municipal waste. Old appliances must be collected
separately, in order to optimize the recovery and recycling of the materials they
To Next Page
Loading...
Need help?
General