cecotec FAST&FURIOUS 4020 FORCE User Manual

28
ENGLISH
FAST&FURIOUS 4020 FORCE
6. TROUBLESHOOTING
Problem Possible solution
The steamer does not heat up. Check main plug is inserted correctly.
Check the power supply.
Check the power button.
The steamer does not produce steam. Check the water level and the water tank inlet
cover is properly covered.
Press the steam push button harder.
Hold the steamer in an upright position.
Water leaks from the water tank. Make sure water does not exceed the MAX.
mark.
Make sure water tank inlet cover is properly
closed.
Always use the steamer in an upright position.
The steamer is producing smoke and a loud
humming sound.
Check water level and rell the water tank.
The steamer does not remove creases
correctly.
Hold the steamer in an upright position and
stretch the fabric downward to ensure best
results.
Unsure when to use the clothes brush. When steaming delicate fabric, such as silk
to reduce the risk of water dripping onto the
garment while steaming.
Metal accessories on garment are
discolouring.
Do not steam directly over the metal
accessories.
Use caution and steam around the metal
accessories.
7. TECHNICAL SPECIFICATIONS
Product reference: 05517
Producto: Fast&Furious 4020 Force
1400 W, 220-240 V, 50/60 Hz
Made in China | Designed in Spain

cecotec FAST&FURIOUS 4020 FORCE Specifications

General

Device type	Handheld garment steamer
Control type	Buttons, Touch
On/off switch	Yes
Product color	Black, Silver, Turquoise
On/off switch type	Foot switch
Water tank capacity	0.28 L
Continuous steam performance	25 g/min
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz

Weight and Dimensions

Depth	130 mm
Width	120 mm
Height	280 mm
Weight	800 g
Package width	305 mm
Package height	70 mm
Package weight	1170 g