26
Note: To prevent the soleplate from leaking, do not keep the steam burst button pressed for
more than 5 seconds.
Note: For optimal steam burst, do not press the steam burst button more than three times in a
row to prevent the iron from cooling.
Vertical steaming
Ensure there is enough water in the tank.
Stand the steam iron vertically, rest it on its heel and connect it to the power supply.
Turn the temperature and steam knob to maximum.
Hold the iron vertically and press the steam burst button, an intense steam will be ejected
from the soleplate.
Self-cleaning
Fill the water tank up to the maximum mark and close it.
Set the temperature knob to maximum.
Connect the appliance to the power supply.
Holding the iron horizontally over the sink, turn the steam knob to the maximum position and
press the self-clean button.
The soleplate will emit boiling water and steam to remove all impurities.
Repeat this process if necessary.
Anti-drip function
This function prevents water from spilling and avoids blotches from appearing on the fabrics
when ironing at low temperatures.
Anti-calc function
This function protects the iron from scale formations.
Do not use abrasive cleaners or scouring pads to clean the product.
Automatic shut-off function
The device will automatically turn off if no movement is made after approximately 30 seconds
while being on a horizontal position or approximately 8 minutes on a vertical position. The
soleplate may take up to 45-60 minutes to cool completely down.
Lift the device to continue operating it or move it gently, and once it has reached the optimum
temperature it will be ready for use again.
4. CLEANING AND MAINTENANCE
Turn off, unplug the appliance from the power supply, empty the water tank (do it after each
use) and allow it to cool down completely.
To Next Page
Loading...
