ENGLISH
13PERFECTSTEAK 4250 STAND
3. BEFORE USE
1. Take the product out of the box.
2. Remove all packaging materials and promotional labels or stickers from the product.
3. Clean the grid (4), the upper tray (7) and the fat-drip tray (2) with a soft dampened cloth.
NOTE: Smoke might be observed during first use due to residual wastes from manufacture. Make
sure the grid and the fat-drip tray are clean and dry before operating.
4. PRODUCT ASSEMBLY
1
1. Place the product on a flat, stable and dry surface.
2. Introduce the fat-drip tray in the product’s main body.
3. Place the heating elements inside the fat-drip tray.
4. Place the grid on top of the heating element and fat-drip tray and adjust it to the desired
height.
To Next Page
Loading...
