cecotec POWER BLACK TITANIUM 2200MAX SMOOTH - Troubleshooting

POWER BLACK TITANIUM 2200MAX SMOOTH
33
ENGLISH
- If a problem has arisen during use, do not disassemble the main body of the blender (main
unit) yourself; there are no user-serviceable parts inside. Contact the ocial Cecotec
Technical Support Service for repair.
Warning:
- Handle the blades with care.
- Do not use cleaners, steel wool or other abrasive materials.
- Do not use benzine, alcohol, thinners, etc.
- The blender parts are not dishwasher safe.
5. TROUBLESHOOTING
For the following minor malfunctions, please try to solve the problem yourself before
contacting the ocial Cecotec Technical Support Service.
Problem/Error Possible cause Possible solution
Blender does not
switch on
1. Loose or defective
plug.
1. Make sure that the plug is
properly connected.
2. Blown fuse in the
cable or in the
housing.
2. Replace the fuse or check the
electrical installation.
3. Problems with the
power button.
3. Contact the ocial Cecotec
Technical Support Service.
4. Problems with the
cable or plug.
4. Repair or replace the cable or
plug if necessary.
The blender makes
abnormal noise or
strong vibrations
1. Food stuck in the
blades.
1. Switch o the blender and unplug
it, then remove the stuck food.
2. Unstable or
unbalanced base.
2. Make sure the base is placed on a
stable surface.
3. Wear and tear of
blades or jug.
3. Check the condition of the
blades and jug, replace them if
necessary.
4. Motor fault.
4. Contact the ocial Technical
Support Service of Cecotec