EasyManua.ls Logo

cecotec PROCLEAN 5110 INOX - Parts and Components; Component Identification; Before Use; Initial Setup and Placement

cecotec PROCLEAN 5110 INOX
28 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PROCLEAN 5110 INOX | 19
ENGLESK
1. PARTS AND COMPONENTS
1. Door Safety Lock System
2. Oven Window
3. Rotating axis
4. Roller Ring
5. Glass Tray
6. Control Panel
7. Mica plate
8. Grill rack
2. BEFORE USE
WARNING: never remove the mica plate.
Take the product out of its package. If the microwave has a protective
lm, tear it o before starting operation. Check carefully if there is any
damage, and if there is, immediately notify the Technical Support Service.
The product must be placed on a at, stable and dry place and kept
away from corrosive materials, heat and humidity, such as gas burners
or water.
To ensure enough ventilation, minimum distances have to be kept:
-- From the back part to the wall: 10 cm.
-- From the side to the wall: 5 cm.
-- Free distance from the top surface: 20 cm.
-- From the microwave to the ground: 85 cm.
The product must be placed, at least, at 5 m from the TV, Radio or
antenna.
The product must be placed in such way that the plug is accessible, and
must ensure an eective grounding in case of leakage in order to avoid
electric shocks.
The microwave door must be closed in order to operate.
In case there is any manufacturing rests in the microwave cavity or on the
heating elements, leave the microwave open to ensure good ventilation.
In such case, it is recommended to heat a glass of water at high power
for several times.

Related product manuals