ENGLISH
22 PROCLEAN 6010
Example: setting clock at 12:30
Steps Display
1
After powering up, display panel shows the colon
sign, then press Reset button once or wait for 30
seconds.
:
2 Press button “1”, “2”, “3”, “0”. 12:30
3 Press Clock button to conrm.
7) SETTING TIMER
You can use the timer function independently, even while the microwave is operating.
1) Press Timer key.
2) Enter cooking time by pressing the number keys. Time is set in minutes and seconds, from left to
right. The maximum cooking time is 99 minutes, 99 seconds. For example, to program:
a. 5 seconds: press 5.
b. 24 minutes, 5 seconds: press 2405.
3) Press Start/Stop key to conrm.
CAUTION
- Time countdown can be seen in display for 3 seconds before it goes back to stand by position.
- Press Timer and then press Reset to cancel timer during countdown.
8) SETTING COOKING TIME AND POWER LEVEL
A. One-stage cooking
1) On standby state or clock state, press Power button to select the desired power level.
2) Use the number keys to set cooking time. If the desired cooking time is more than 1 minute, enter
numbers for both minutes and seconds.
For example: to set 20 minutes, enter 2, 0, 0, 0.
3) Press Start/Stop to start cooking.
Example: cooking at P80 for 10 minutes.
Steps Display
1
After powering up, display shows colon. Press
Reset button once or wait for 30 secconds.
:
01536_ProClean 6010_Manual_PE.indd 22 24/4/18 9:17
To Next Page
Loading...
