16 READY WARM 10000 TOP CERAMIC
the appliance is being used by or near children.
3. BEFORE USE
1. Take the product out of the box and remove any packaging materials.
2. Check for any visible damage, if any is observed, contact as soon as possible the Technical
Support Service of Cecotec for advice or reparation.
3. Place the heater on a at and stable surface.
4. Set the power-level switch at “0” and plug the product’s cord into an earthed power supply.
4.OPERATION
POWER-LEVEL KNOB
Off
Fan
Low-power heating
High-power heating
THERMOSTAT
Turn the thermostat to maximum and select
the desired power level. Once the room has reached
the desired temperature, turn the thermostat
anticlockwise until the heater shuts off. The thermostat
will turn on and off automatically in order to maintain
the selected temperature.
NOTE: the appliance will not turn on until the room temperature falls below the set one.
OSCILLATION
The heater is designed to turn automatically off when tipped forward or backward. The unit
will automatically turn on once it is returned to its normal upright position.
SAFETY TIP-OVER SWITCH
The heater is designed to turn automatically off when tipped forward or backward. The unit
will automatically turn on once it is returned to its normal upright position
To Next Page
Loading...
