ENGLISH
12 READY WARM SPACE 360
3. PRODUCT ASSEMBLY
1. Take the product out of the box and remove all packaging materials.
2. Turn the heater upside down.
3. Place the wheel-mounting plate between the end ns.
4. Attach them to the heater using the U-shaped bolts and wing nuts supplied.
5. Tighten the wing nuts.
6. Turn the heater the right way up.
4. BEFORE USE
• Place the radiator on a at, stable surface.
• Set the power switch and thermostat knob to 0.
• Plug the appliance to a properly-earthed power outlet.
5. OPERATION
1. Make sure the power-level switches are set at the OFF positions and the thermostat knob at
0, then connect the device to a power supply.
2. Turn the thermostat knob clockwise to increase temperature or anticlockwise to decrease it
and select the desired temperature.
3. Select the desired heating power level by pressing switches:
a) I: 600 W (7 ns) a) I: 800 W (9 ns) a) I: 1000 W (11 ns)
b) II: 900 W. (7 ns) b) II: 1200 W. (9 ns) b) II: 1500 W. (11 ns)
c) I and II: 1500 W. (7 ns) c) I and II: 2000 W. (9 ns) c) I and II: 2500 W. (11 ns)
4. The light indicator will light up during operation.
5. Once you have nished using the heater, switch all the switches to the OFF position, turn the
thermostat knob to 0 and unplug it from the power supply.
To Next Page
Loading...
