cecotec READY WARM 9000 TWIN TOWEL - Safety Instructions

READY WARM 9000 TWIN TOWEL / 9050 TWIN TOWEL STEEL / 9090 TWIN TOWEL BLACK
6
SAFETY INSTRUCTIONS
Read these instructions thoroughly before using the appliance.
Keep this instruction manual for future reference or new users.
- Make sure that the mains voltage matches the voltage
stated on the rating label of the appliance and that the wall
outlet is grounded.
- This product is designed only for household use. Do not use
for industrial or commercial purposes.
- Check the power cord regularly for visible damage. If the
cord is damaged, it must be replaced by the ocial Technical
Support Service of Cecotec in order to avoid any type of
danger.
- Do not cover the device in order to avoid overheating.
- The installation of this appliance on the wall of a bathroom
always must be done at a distance where no person in the
shower or in the bath may reach it.
- Do not use the device directly on the oor without installing
the legs.
- Do not place the appliance close to heat sources, ammable
substances, wet surfaces or allow it to come into contact
with water or other liquids. Do not operate outdoors.
- The appliance must not be placed immediately below a
socket.
- Allow the device to operate at maximum temperature for
2-3 hours in a ventilated place in order for the device to
eliminate all manufacturing wastes.
- The product’s surface will reach high temperatures during
operation. Avoid skin from getting in contact with it and use
the handle to move it.
- Always use it with the ns in horizontal position.
- Keep the packaging materials out of the reach of children,