cecotec READYWARM 6300 CERAMIC TOUCH - Technical Support and Warranty

READYWARM 6300 CERAMIC TOUCH
2928
human health and the environment.
The crossed out “wheeled bin” symbol on the product reminds you of your obligation to
dispose of the appliance correctly. If the product has a built-in battery or uses batteries, they
should be removed from the appliance and disposed of appropriately.
Consumers must contact their local authorities or retailer for information concerning the
correct disposal of old appliances and/or their batteries.
7. TECHNICAL SUPPORT AND WARRANTY
This product is under warranty for 2 years from the date of purchase, as long as the proof
of purchase is submitted, the product is in perfect physical condition, and it has been given
proper use, as explained in this instruction manual.
The warranty will not cover the following situations:
The product has been used for purposes other than those intended for it, misused, beaten,
exposed to moisture, immersed in liquid or corrosive substances, as well as any other fault
attributable to the customer.
The product has been disassembled, modied, or repaired by persons, not authorised by the
ocial Technical Support Service of Cecotec.
Faults deriving from the normal wear and tear of its parts, due to use.
The warranty service covers every manufacturing defects of your appliance for 2 years,
based on current legislation, except consumable parts. In the event of misuse, the warranty
will not apply.
If at any moment you detect any problem with your product or have any doubt, do not
hesitate to contact Cecotec Technical Support Service at +34 963 210 728.
Model: 05368 ReadyWarm 6300 Ceramic Touch
Item Symbol Value Unit Item Unit
Heating power Type of heat input, for electric storage
local space heaters only (single select)
Nominal
heat output
Pnom 1,953 kW Manual heat
charge control
with integrated
thermostat
[no]
Minimum
heat output
(indicative)
Pmin 0,0211 kW Manual heat
charge control
with room and/
or outdoor
temperature
feedback
[no]
Maximum
continuous
heat output
Pmax 1,953 kW Electronic heat
charge control
with room and/
or outdoor
temperature
feedback
[no]
Auxiliary electricity consumption
Fan assisted heat
output
[no]
At nominal
heat output
elmax 0,000 kW
Type of heat output/room temperature
control (single select)
At minimum
heat output
elmin 0,000 kW Single stage heat
output and no
room temperature
control
[no]
In standby
mode
elSB 0,00068 kW Two or more
manual stages, no
room temperature
control
[no]
With mechanic
thermostat room
temperature
control
[no]
With electronic
room temperature
control
[yes]
Electronic room
temperature
control plus day
timer
[no]
Electronic room
temperature
control plus week
timer
[no]
Other control options (multiple
selections possible)
ENGLISHENGLISH