7
STEELMILL 2000 ADJUST
- Do not twist, bend, pull, or damage the power cord. Protect
it from sharp edges and heat sources. Do not allow the cord
to touch hot surfaces. Do not let the cord hang over the edge
of the working surface or worktop.
- Never leave the appliance unattended while in use.
- Do not use accessories not provided or suggested by Cecotec,
as these could cause damage to the product or result in risk.
- Do not connect the device to the power supply unless fully
and safely assembled.
- Do not exceed the MAX mark.
- The device is only suitable for grinding coee beans. Do not
use it to grind any other type of food.
- To avoid overheating the motor, do not use the at grindstone
system for more than one minute at a time.
- Let the device rest for one minute after using it twice in
succession. Do not perform more than two grinding cycles
at a time.
- Do not move the device during operation.
04277_SteelMill 2000 Adjust_IM_YV_02230227.indd 704277_SteelMill 2000 Adjust_IM_YV_02230227.indd 7 28/2/23 16:1428/2/23 16:14
To Next Page
Loading...
