cecotec TOTALPURE 2000 CONNECTED - Cleaning and Maintenance

20
ENGLISH
TOTALPURE 2000 CONNECTED
Wi-Fi
In order to link your product with our App, please follow the below steps.
Download the EnergySilence App from Google Play or App Store.
If it is the rst time you use it, register an account. If not, log in.
Once you have entered the App, press “+” on the top right-hand corner and tap “TotalPure
2000”.
Turn your device on, press the Wi-Fi button until the device beeps. Check that the button light
indicator is blinking quickly and if it is not, press the button again.
Enter your Wi-Fi password and press conrm.
Then, the linking process will start automatically.
If the automatic linking process fails, press the Wi-Fi button again until the device beeps. Check
that the button light indicator is blinking slowly.
Conrm the Wi-Fi password again and follow the instructions indicated by the App.
5. CLEANING AND MAINTENANCE
Turn off and unplug the product from the power supply before cleaning or repairing it.
Use a soft, dry (or slightly damp) cloth with some neutral cleaning agent to clean the product’s
outside and prevent the accumulation of dust and dirt.
If the product is not going to be used for a long time, store it in a safe and well-ventilated place.
Do not use detergent, scouring pads, chemically-treated cloths, gasoline, benzene, alcohol,
thinner, or other solvents, as these can scratch and damage the tank and cause water leakage.
Do not immerse the product in water or any other liquid.
Maintenance and repair
Rotate the base all the way anticlockwise and then remove it.
Take the high-efciency lter out and clean it or replace it.
Fig. 4.
Assemble the product back by replacing the base and turning it clockwise.
Fig. 5.
Do not wash the lter.
Note: If the device no longer eliminated odours, the lter must be cleaned or replaced with a
new one.