7
Mount Wardrobe Tube Support (B) in left wardrobe section, 2 holes down from
both 24” shelf (3), with Flathead Phillips Screw (D). Do same for both end pieces.
Set both Wardrobe Tube 24” (K) in 24” shelving sections.
Mount Wardrobe Tube Support (B) in right wardrobe section 2 holes down from
Adjustable Shelf (6).
Measure distance between two ends of Wardrobe Tube Support (B), mark
Wardrobe Tube 51” (L) and cut with Hacksaw or a Tube Cutter.
Set Wardrobe Tube (L) in adjustable shelf section.
With Shelf Support (N) add three 18” Tower Shelf (5) to desired locations in the
middle/tower section.
Position all Wall and Tower Panels (1 & 2), mount Panel Bracket (M) onto back
wall using Panhead Phillips Screw (E) and Dry Wall Anchor (C) if necessary.
Hint:
- Suggested Shelf and Wardrobe Tube locations can be changed
- Customize you closet to meet your need.
Now your beautiful new cedar closet is finished, enjoy the aromatic scent.
To Next Page
Loading...