18
User Option Mode
1) Open the oven door and press pad 2 until the buzzer sounds and OP:--
displays in the LED.
2) Using the chart on Page 11, select the pad for the option you wish to
change. The option will display in the LED with the current selection
showing. If correct press Start to save. Screen returns to OP:--
3) If you wish to change, press the same pad until the User option number is
displayed and then press Start to save.
Example: To change the buzzer under Option 2, press pad 2. Default if
never changed the display will show OP:22. Press 2 again to go through
OP:23 OP:20 OP:21, stopping when you see the option you require. Press
Start to save.
4) During the process if you press STOP/Reset you will exit Options Mode and
no changes will be saved.
5) When you have made and saved all your changes, close the door and the
oven will be back in Ready Mode.
6) If you do not press Start at the end of each change, it will not save and the
previous setting will be enabled.
Inquiry Function
During microwave cooking, press Time Entry to check the power level the oven is
working in. The LED will display the power level for 3 seconds then return to the
time countdown. This is available on stage cooking also.
Factory Default Setting
To set the oven back to the original factory default settings:
In power on and Ready Mode press Start and 0 at the same time and the oven
revert back to the settings originally set at the factory.
To Next Page
Loading...