13
LED Display
When the machine is operating, the LED Display shows the current room
humidity(%). When the user sets the timer function, the LED Display will show
the hour set time.
Air Purify Indicator
When the machine starts, the air purify function starts working automatically. The Air
Purify Indicator turns to green colour. The UV light and Ionizer air purify
functions work automatically.
Full water Indicator
When the water tank is full of water, the machine stops working automatically. The
full water Indicator turns on and becomes red colour. Then the user needs
to empty the tank then put it back in the machine. After that, the full water Indicator
will turn off and the machine will start to work automatically.
Dehumidify Indicator
When the machine is operating, the Dehumidify Indicator turns to blue colour.
When machine is stopped, this indicator turns off and the machine stop working.
3. In the timer setting interface, hold the timer key for 5 seconds, the LED
display will show the current room temperature.
4. In the timer setting interface, if the selected time is 00 hours, the timer function
will be disabled.
2. Connect the power and enter the stand by state "--", press the timer key to
enter the timer settings interface, set the desired hour for the machine timer on
function with the same steps above. The machine will automatically turn on when
reaches the set time and begins to dehumidify.
To Next Page
Loading...
