Notes:
Pairing mode will last 2 minutes. BTH200H will switch to standby mode
automatically if it can’t pair with any device after 2minutes. If you want to
continue to pair the BTH200H with a Bluetooth device, please turn off the
BTH200H first and re-pair according to steps 1～6 mentioned above.
BTH200H will turn off automatically when it can’t connect to any device
after 5 minutes.
BTH200H can remember 8 paired devices, when the number of paired
devices exceeds 8, the first one will be replaced.
Every time you switch on BTH200H, it will connect to the last connected
device automatically. If you want to pair it with other devices, please switch
off the current device’s Bluetooth function first and try to pair BTH200H
with the new device according to steps 1～6 mentioned above.
BTH200H can connect with two devices simultaneously, either two
Bluetooth cell phones or two Intercom headsets or one cell phone and one
headset.
When BTH200H gets out of range of the connected devices it will
automatically reconnect to the devices as soon as it is in range again,
either if it was connected to a Intercom headset or a Bluetooth phone or
both of them.
3. Intercom function
If you connect two Intercom headsets to each other, you are able to
intercommunicate between the devices. Specific operations are as follows:
Press and hold Volume + or
Volume - for about 2 seconds, and
release it after hearing “DU”
tone
To Next Page
Loading...