Need help?Do you have a question about the Cely SVC-50 and is the answer not in the manual?
Guidelines for placing the platform on a firm, even surface and avoiding environmental hazards.
Instructions for assembling the column, attaching the platform, and connecting the indicator.
Procedure for manually setting the scale to zero.
Steps to set the tare value for packaging or other items.
Determining the weight of a sample after taring the packaging.
Instructions for using the item counting function, including sample size selection.
Operational modes for the checkweigher function.
How the checkweigher mode works, triggering signals based on stored limits.
Defines weight check range and weight check key point modes.
Describes alarm modes for weight check range and key point functions.
Procedure to set the upper and lower limits for weight checking.
Configuration options for the alarm modes (sound/no sound).
Details on manual accumulation of weights and viewing totals.
Instructions for using the scales for weighing animals, including accumulation.
Setting the lower and upper limits for weight control.
Functions for clearing or printing the accumulated memory.
Determines the unit of weight displayed on the scale.
Setting the current date and time on the indicator.
Configuration for clock, backlight, and alarm beep modes.
Setting up RS-232 printing, data transfer rates, and accessing configuration via password.
Configuration of zero tracking options and manual zero range.
Settings for decimal point, step, capacity, and vibration filtering.
Options for calibration, load cell trimming, internal counting, and factory reset.
To Next Page
General
