To Next Page

To Previous Page

• Keep the device away from water and heat, including direct sunlight.

• Do not drop the device or knock on it or use it if it is damaged.

• It can affect the accuracy of measurements when the forehead is covered by hair.Sweat, hat or scarf

(see part 10-4)

• Keep the measuring distance to 5 cm to 15 cm (see part 10-4).

• The infrared body thermometer should be left in this room for 15 to 20 minutes before use.

• It may affect the accuracy of measurements if the forehead is covered by sweat or other factors.

Please measure the temperature behind the earlobe (see part 10-5).

• Clean the glass with a cotton swab lightly moistened with 70% alcohol.

Attention:

• Be sure to remove hair and sweat from the forehead before measuring the temperature.

• Selection of the "Body" mode to measure body temperature;Select the "Surface" mode to measure

the surface temperature.

• Using this thermometer is not a substitute for consulting your doctor.

• If you experience a problem with your device, please contact your dealer. Do not attempt to repair the

device yourself.

• According to the EMC standard, medical electronic products should be specially serviced.

3. Functions

• Precise non-contact measurements

• User selectable ° C or ° F.

• Selectable body and surface temperature

• Adjustable alarm value

• Storage of the last 32 measurements

• Automatic holding and turning off data

• Automatic selection range and display resolution 0.1°C (0.1°F)

• LCD display with backlight

Questions and Answers:

Need help?

Do you have a question about the CEM DT-8806H and is the answer not in the manual?

CEM DT-8806H Specifications

General