Page 2SKU 92801 For technical questions, please call 1-800-444-3353.
PRODUCT SPECIFICATIONS
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may
result in serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
1. Keep your work area clean and well lit. Cluttered benches and dark areas
invite accidents.
2. Do not operate this tool in explosive atmospheres, such as in the presence
of flammable liquids, gases, or dust. Electrically powered tools create sparks
NOTE: No replacement parts are available for this product.
metInoitpircseD
ylppuSrewoPseirettaBeziS"C"4
dohteMgnileveLlacitreV&latnoziroHlaunaMwercS-owT
ycaruccAgnirusaeM)'33otpu"4/
1(mm5.0-/+
egnaRelbisiVrofmumixaM'03~,toDrofmumixaM'001~eniL
)noitanimullIaerAkroWnognidnepeDseiraV(
ytica
paCnoitatoR°063
deepSnoitatoR)elbairaV(MPR006ot0
sedulcnI seirettaB"C"4,esaC,dopirT,selggoGtnemecnahnEresa
L
thgieWtinUsdnuoP09.3
UNPACKING
When unpacking, check to make sure all the parts shown in this manual are included. If
any parts are missing or broken, please call Harbor Freight Tools at the number shown on
the cover of this manual as soon as possible.
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
To Next Page
Loading...
Need help?
General
