To Next PageTo Next Page
Need help?Do you have a question about the CEN-TECH 94233 and is the answer not in the manual?
Ensure the work area is tidy to prevent injuries and maintain focus.
Avoid damp or wet locations; ensure good lighting and no flammable gases.
Avoid pointing laser at people/animals; do not reflect beam to prevent damage/explosion.
Avoid procedures causing radiation exposure; optical instruments increase eye hazard.
Instructions on preparing the thermometer and target for accurate temperature readings.
Steps for holding and pointing the thermometer to measure object temperature.
Ensure the work area is tidy to prevent injuries and maintain focus.
Avoid damp or wet locations; ensure good lighting and no flammable gases.
Avoid pointing laser at people/animals; do not reflect beam to prevent damage/explosion.
Avoid procedures causing radiation exposure; optical instruments increase eye hazard.
Instructions on preparing the thermometer and target for accurate temperature readings.
Steps for holding and pointing the thermometer to measure object temperature.
General| Type | Infrared Thermometer |
|---|---|
| Temperature Range | -58°F to 1022°F (-50°C to 550°C) |
| Response Time | 500 ms |
| Emissivity | 0.95 (fixed) |
| Distance to Spot Ratio | 12:1 |
| Power Source | 9V battery |
| Laser Pointer | Yes |
| Display | LCD |
| Resolution | 0.1°F/°C |
| Battery Type | 9V |
| Auto Power Off | Yes |
| Accuracy | ±4°F (±2°C) or 2% of reading |
