Windows 2000/ Me/ XP /
Vista/ 7/ 8/ 8.1/10 and
above, Mac OS 9.1/10
and Linux
1.CONTENT 2.OS Support
3.CONNECTING HDD
802RU
Connect the power connector
from the power adapter, and
plug the power adapter to the
power source
Connect the USB cable
to the computer
Connect the USB 3.0
connector to the unit
Install the hard drives into the
trays and put it back to the unit
Pull out the hard drive
from the unit
4.Partition and Format
2 Bay RAID HDD ENCLOSURE USB 3.0 to SATA
Model : 802RU
Select the RAID mode when
power is off. Power on the
unit while holding down the
reset button for 5 seconds
Please follow below information on how to
partition and format the drives before use
Data will be lost when you reset the unit
1. Right click on “My Computer”
icon and select “Manage”.When
this window appears, select
“Disk Management”.
2. Right click on the disk on “New
Volume” and select “Initialize Disk”.
3. Select the new disk to start with
the configuration.
PRODUCT INSTRUCTION
/
To Next Page
General