EasyManua.ls Logo

Cenocco CC-9074GRN - Operational Safety Guidelines; Surface Temperature and Material Contact; Electrical Connection and Extension Leads; Intended Use and Environmental Considerations

Default Icon
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
The temperature of accessible surfaces m ay be very high when the
appliance is operating. Never touch these parts, of apparatus, to
avoid burning itself.
Make sure the appliance never comes into contact with flammable
materials, such as curtains, cloth, etc...& the power cord and plug do
not come in contact with water.
Before cleaning, always unplug the appliance from the power supply
and let it cool down.
This appliance is not intended to be operated by means of an
exter
nal timer or separate remote-control system.
Always place the unit on a flat surface. Ensure, also, not to cover the
device and not to put anything on it.
Always remove the plug from the wall socket when the appliance is
not in use.
When using an extension lead always make sure that the entire cable
is unwound from the reel. Use solely CE approved extension leads.
Input power must be at least 16A, 250V, 3000W.
Incorrect operation and improper use can damage the appliance and
c
ause injury to the user.
This device, designed for home use, complies with standards relating
to this type of product.
The appliance must be used and rested on a table or flat & stable
surface.
The item must not be left unattended when it is connected to main
supply.
The item is not to be used, if it has been dropped or if there are visible
signs of damage or if it is leaking.
Regarding the instructions for cleaning, thanks to refer to the below
paragraph of the manual.
This appliance is only intended for household use.
Never direct steam towards people, animals or plants, or equipment
containing electrical components such as the interior of ovens.
FIRST USE
Before first use, remove the device and all accessories and being careful with
sharp accessories.
Clean the apparatus according to the instructions in "Cleaning" paragraph.
Place the machine on a suitable flat, stable surface.